1. Smappee Extension Set - 3 Current Clamps + 3 Y-cables

    Pour une installation en Belgique.

    Changez de pays

    Extension set: 3 CTs and 3 Y-cables

    65,00 €
    • Extension set to add the readings of two CTs
    • Works with two consumption meters (e.g. a separately metered heat pump). Needs to be installed within 100 cm / 3 Feet of both connection points
    • Note! Does not work to combine solar readings with consumption readings
    • Incl. 3 CTs (cable length: 150 cm / 59 inch; 50 Amps)
    • Incl. 3 Y-cables
    - +
  2. CT 50A, 10 mm / 0,4 inch

    Pour une installation en Belgique.

    Changez de pays

    CT 50A, 10 mm / 0,4 inch

    24,20 €
    • CT, 50 Amps, diameter 10 mm / 0,4 inch
    - +
  3. CT 100A, 16 mm / 0,6 inch

    Pour une installation en Belgique.

    Changez de pays

    CT 100A, 16 mm / 0,6 inch

    35,09 €
    • CT, 100 Amps, diameter 16 mm / 0,6 inch
    - +
  4. Smappee Current Clamp, 200A, 24mm

    Pour une installation en Belgique.

    Changez de pays

    CT 200A, 24 mm / 0,9 inch

    48,40 €
    • CT, 200 Amps, diameter 24 mm / 0,9 inch
    - +
  5. Extension Y-cable

    Pour une installation en Belgique.

    Changez de pays

    Extension Y-cable

    6,00 €
    • Y-cable to add the measurements of two CTs and connect them to one single Smappee input
    • Only works with Smappee Non-Solar or 1-Phase (3 inputs)
    • Doesn't work with Smappee Solar 3-Phase (6 inputs)
    • Doesn't work to combine measurements of solar production and consumption
    • Note! Contact our Support team via support@smappee.com before purchase
    - +
  6. Replacement V-cable

    Pour une installation en Belgique.

    Changez de pays

    Replacement V-cable

    6,00 €
    • V-cable is required to connect a CT to an input of the solar energy monitor
    • Only works with Smappee Solar
    • Note! Do not confuse the V-cable and the Y-cable. They are completely different.
    - +
  7. Optical sensor

    Pour une installation en Belgique.

    Changez de pays

    Optical sensor

    29,95 €
    • Sensor to read out data on gas and water meters (typically gas)
    • Accessory to Smappee Gas & Water
    • Only works with meters with a mirror in the numbers 6, 8, 9 or 0 or with meters with a little rotating wheel
    • Note! Included in Smappee Gas & Water
    • Incl. 1 optical sensor
    • Incl. 1 cable to connect sensor to the Smappee monitor (1 m / 39 inch)
    • Incl. 3 mounting strips
    - +
  8. Magnetic sensor

    Pour une installation en Belgique.

    Changez de pays

    Magnetic sensor

    19,95 €
    • Sensor to read out data on gas and water meters (typically water)
    • Accessory to Smappee Gas & Water
    • Only works with meters that have a little hole on the left, on the right or underneath, where the sensor can be inserted
    • Note! Included in Smappee Gas & Water
    • Incl. 1 magnetic sensor
    • Incl. 1 cable to connect sensor to the Smappee monitor (1 m / 39 inch)
    - +
  9. Remote control for Comfort Plugs™

    Pour une installation en Belgique.

    Changez de pays

    Remote control for Comfort Plugs™

    9,95 €
    • Remote control for your appliances connected to a Comfort PlugTM
    • Note ! Remote control is included in Comfort PlugsTM packs
    - +
  10. Smappee exchange package to Smappee Solar

    Pour une installation en Belgique.

    Changez de pays

    Smappee exchange package to Smappee Solar

    199,00 €

    Exchange Package to upgrade your Smappee Energy (non-solar) to a Smappee Solar (Incl. 1 Smappee Solar, 3 additional CTs and 3 V-cables)

    Important! Contact the Smappee Support team before purchasse. Send an e-mail to support@smappee.com. Follow the instructions from our Support team.Return your Smappee Energy for this exchange. Keep your current power cable and 3 CTs installed and do NOT send them back.

    - +
  11. Smappee repair service

    Pour une installation en Belgique.

    Changez de pays

    Smappee repair service

    119,00 €

    Repair service if your Smappee Solar or Energy is defect after your warranty has expired.

    Important! Please contact our support team before purchase. Get a support ticket number with a confirmation to order the Smappee repair service. Send an email to support@smappee.com. Describe the problem and provide the serial number of your Smappee Energy or Solar. Send us your Smappee energy monitor by a parcel service of your choice. Our experts will investigate the problem and fix it. Repair is guaranteed. If we can't fix the hardware defect, you will receive a refurbished and tested replacement unit. Without any loss of data.

    - +
  En cours de chargement...
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x