1. Extension set: 3 CTs and 3 Y-cables

    Pour une installation en Canada.

    Changez de pays

    Extension set: 3 CTs and 3 Y-cables

    80,00 C$ hors TVA
    • Extension set to add the readings of 2 CTs
    • Works with two consumption meters (e.g. a separately metered heat pump). Needs to be installed within 100 cm (39.37 inches) of both connection points
    • Note! Does not work to combine solar readings with consumption readings
    • Incl. 3 Split Core CTs, cable length: 150 cm (59.06 inches), 50 A
    • Incl. 3 Y-cables
    - +
  2. Smappee repair service

    Pour une installation en Canada.

    Changez de pays

    Smappee repair service

    189,00 C$ hors TVA

    Buy the Smappee repair service when your maximum 24 months guarantee has expired and you want to replace your energy monitor.
    Incl. repair of one Smappee energy monitor or receive a refurbished and tested replacement unit, without loss of data.
    Important: Please buy the support service ONLY AFTER you have contacted our support team. Just send an email to support@smappee.com, describe the problem and provide the serial number of your Smappee energy monitor.

    - +
  3. Smappee support service

    Pour une installation en Canada.

    Changez de pays

    Smappee support service

    41,32 C$ hors TVA

    Buy the Smappee support service when your maximum 24 months guarantee has expired and you need support or you want to reinstall your energy monitor.
    Incl. support service for 1 support ticket.
    Important: Please buy the support service ONLY AFTER you have contacted our support team. Just send an email to support@smappee.com, describe the problem and provide the serial number of your Smappee energy monitor.

    - +
  4. Extension Y-cable

    Pour une installation en Canada.

    Changez de pays

    Extension Y-cable

    7,20 C$ hors TVA
    • Y-cable to add the measurements of two CTs and connect them to one single Smappee input
    • Only works with Smappee Non-Solar or 1-Phase (3 inputs)
    • Doesn't work with Smappee Solar 3-Phase (6 inputs)
    • Doesn't work to combine measurements of solar production and consumption
    • Incl. 1 Y-cable
    • Note! Contact our Support team via support@smappee.com before purchase
    - +
  5. Replacement V-cable

    Pour une installation en Canada.

    Changez de pays

    Replacement V-cable

    3,60 C$ hors TVA
    • V-cable is required to connect a CT to an input of the solar energy monitor
    • Only works with Smappee Solar
    • Note! Do not confuse the V-cable and the Y-cable. They are completely different.
    • Incl. 1 V-cable
    - +
  6. Optical sensor

    Pour une installation en Canada.

    Changez de pays

    Optical sensor

    59,95 C$ hors TVA
    • Sensor to read out data on gas and water meters (typically gas) and to be used with the Smappee Gas & Water. 
    • This optical sensor is fit for meters with a mirror in the numbers 6, 8, 9 or 0 or for meters with a little rotating wheel. 
    • This item includes a sensor, a cable (39.37 inches)  to connect it to the Smappee monitor and 3 mounting strips for exact and easy installation on the meter.
    - +
  7. Magnetic sensor

    Pour une installation en Canada.

    Changez de pays

    Magnetic sensor

    46,95 C$ hors TVA
    • Sensor to read out data on gas and water meters (typically water) and to be used with the Smappee Gas & Water.
    • This magnetic sensor is fit for meters that have a little hole on the left, on the right or underneath, where the sensor can be inserted. 
    • This item includes a sensor and a cable (39.37 inches) to connect the sensor to the Smappee monitor.
    - +
  En cours de chargement...
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x