1. Extension set: 3 CTs and 3 Y-cables

    Für Installationen in Deutschland.

    Ändern

    Extension set: 3 CTs and 3 Y-cables

    65,00 €
    • Extension set to add the readings of 2 CTs
    • Works with two consumption meters (e.g. a separately metered heat pump). Needs to be installed within 100 cm (39.37 inches) of both connection points
    • Note! Does not work to combine solar readings with consumption readings
    • Incl. 3 Split Core CTs, cable length: 150 cm (59.06 inches), 50 A
    • Incl. 3 Y-cables
    - +
  2. Smappee repair service

    Für Installationen in Deutschland.

    Ändern

    Smappee repair service

    119,00 €

    Buy the Smappee repair service when your maximum 24 months guarantee has expired and you want to replace your energy monitor.
    Incl. repair of one Smappee energy monitor or receive a refurbished and tested replacement unit, without loss of data.
    Important: Please buy the support service ONLY AFTER you have contacted our support team. Just send an email to support@smappee.com, describe the problem and provide the serial number of your Smappee energy monitor.

    - +
  3. Smappee support service

    Für Installationen in Deutschland.

    Ändern

    Smappee support service

    50,00 €

    Buy the Smappee support service when your maximum 24 months guarantee has expired and you need support or you want to reinstall your energy monitor.
    Incl. support service for 1 support ticket.
    Important: Please buy the support service ONLY AFTER you have contacted our support team. Just send an email to support@smappee.com, describe the problem and provide the serial number of your Smappee energy monitor.

    - +
  4. Extension Y-cable

    Für Installationen in Deutschland.

    Ändern

    Extension Y-cable

    6,00 €
    • Y-cable to add the measurements of two CTs and connect them to one single Smappee input
    • Only works with Smappee Non-Solar or 1-Phase (3 inputs)
    • Doesn't work with Smappee Solar 3-Phase (6 inputs)
    • Doesn't work to combine measurements of solar production and consumption
    • Incl. 1 Y-cable
    • Note! Contact our Support team via support@smappee.com before purchase
    - +
  5. Replacement V-cable

    Für Installationen in Deutschland.

    Ändern

    Replacement V-cable

    6,00 €
    • V-cable is required to connect a CT to an input of the solar energy monitor
    • Only works with Smappee Solar
    • Note! Do not confuse the V-cable and the Y-cable. They are completely different.
    • Incl. 1 V-cable
    - +
  6. Optical sensor

    Für Installationen in Deutschland.

    Ändern

    Optical sensor

    29,95 €
    • Sensor to read out data on gas and water meters (typically gas)
    • Accessory to Smappee Gas & Water
    • Only works with meters with a mirror in the numbers 6, 8, 9 or 0 or with meters with a little rotating wheel
    • Note! Included in Smappee Gas & Water
    • Incl. 1 optical sensor
    • Incl. 1 cable to connect sensor to the Smappee monitor (1 m / 39 inches)
    • Incl. 3 mounting strips
    - +
  7. Magnetic sensor

    Für Installationen in Deutschland.

    Ändern

    Magnetic sensor

    19,95 €
    • Sensor to read out data on gas and water meters (typically water)
    • Accessory to Smappee Gas & Water
    • Only works with meters that have a little hole on the left, on the right or underneath, where the sensor can be inserted
    • Note! Included in Smappee Gas & Water
    • Incl. 1 magnetic sensor
    • Incl. 1 cable to connect sensor to the Smappee monitor (1 m / 39 inches)
    - +
  Loading...
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x