Our user-friendly consumer app offers a real-time and historical overview for electricity, solar, gas, and water in kWh, currency and graphics. The Smappee Energy Monitor app is available free of charge for iOS and Android from Appstore or GooglePlay. Thanks to the app, consumers can detect always on power, energy guzzlers and learn more about their energy consumption and how much it costs. It also allows them to control connected appliances and to automate energy flows to optimise energy efficiency.

Let’s take a tour of the Smappee App!

1. See energy consumption at a glance.

Open the app to see the real-time energy flows in the building at a glance. The yellow bubble shows how much electricity is consumed in real-time. The green bubble indicates how much energy the solar panels are producing. Smappee also shows users how much water and gas is being consumed that day.

Get insight in how much of your electricity usage is used by appliances in always on mode and benchmark your electricity usage with that of similar households. Scroll down to see how much you’re spending on your energy use and to get a live overview of what appliances were recently turned on and how much they’re consuming.

2. Get a grip on energy use and standby power.

Smappee gives a better understanding of long-term energy consumption and production. Tap the bubble to swipe through the graphs, zoom in and out to analyse your electricity data from 5 minutes, hourly, daily, weekly, monthly to yearly intervals. You’ll also get a better idea of the standby power consumption, within 24 hours after installation. Because even in standby mode appliances still consume electricity.

Pull up the same data for solar, gas and water. Scroll down for a global overview in kWh and euros, pounds, dollars, etc., find out how much of your solar energy is used for your own consumption (auto-consumption) and how much of your consumption is covered by your solar energy production (self-sufficiency). Supplement the data from the app with the Smappee Dashboard to export energy data and analyse the data on a larger screen with more specific parameters.

3. Automate and control the energy flows.

With Smappee, you have a smart tool to tackle inefficient energy consumption—but there are plenty of other smart devices that can also connect with the Smappee ecosystem. Connect a Smappee Output module or Smappee Switch to remotely operate and automate appliances. In addition, connect with your car charging station, remotely operate smart thermostats and view the energy flows interact with your energy storage system.

Ready for the next step? Enter the gateway to a world of IoT solutions! Automate certain events to use appliances more energy efficient and to make life easier. Trigger smart devices based on activity in your building, activity of an appliance, location, active energy use, sunrise/sunset, time schedule, import/export, monitored state changes or counted pulses of an appliance. On top of that, Smappee allows electric vehicle drivers to enjoy a number of benefits that enhances their charging experience, from overload protection to personalised EV scheduling and optimised self-consumption.

Smappee continuously expands its ecosystem with compatible third party IoT products and platforms. Smappee uses the EEBus and MQTT smart home protocol to quickly develop new use cases and speed up integrations. Discover Smappee’s compatible IoT solutions here.

4. Detect energy guzzlers.

See what’s happening in your home or building live in the Smappee App and discover how appliances are being used. Tap “See all events” to discover when certain appliances are turned on and off. Know how much energy your submetered appliances are consuming and what’s the state of an appliance connected to an Input module.

Tap “Appliances” to find energy values of appliances submetered by Smappee Infinity CTs, Smappee Switch or detected via NILM technology. Sort appliances by “Most consuming” to detect energy guzzlers. Replace them with more energy-efficient appliances or put them on a diet with the Smappee Output module and the Smappee Switch. Or sort appliances by “Most expensive” to see what appliances are costing you the most and maybe use them a bit less?

5. Customise your Smappee experience.

The icing on the cake: personalise your Smappee experience! Go to Settings, tab “Your locations” and go to “Your Tariffs” to align the reported energy costs in the Smappee App with the tariffs and rates that are being applied by your home or building’s utility. On top of that, you can share the data of the building or home with property managers, energy professionals, homeowners etc.

Definitely fill in the Survey so Smappee knows what type of building it’s monitoring; how many people are living in or using the building and what appliances are being used. This allows you to benchmark your energy use and starts Smappee’s patented NILM featureor appliance detection feature.

Customise the energy flows according to your lifestyle or use of the building. Turn off the lights when there’s no one present, close down the blinds when it’s getting dark, turn off the tv when it’s bed time, boost your Smart Grid Ready heat pump when you have solar surplus, etc.

6. Complete and edit configurations.

And finally, the Smappee App is also a user-friendly tool for on-site installation of the Smappee Infinity modules. Perfect for installers! Verify the installation via real-time energy values and the “Load configuration” overview in the App. Remote configuration to complete or edit the installation is possible via the Smappee Dashboard.

And also, the app offers different levels of branding and customised messaging options for our partners. Contact marketing@smappee.com for more information.

Want to experience the Smappee App yourself? Download the app "Smappee Energy Monitor" now from GooglePlay and Appstore.