1. Extension set: 3 CTs and 3 Y-cables

    For setup in United States.

    Change your country

    Extension set: 3 CTs and 3 Y-cables

    $65.00 excl. VAT
    • Extension set to add the readings of two current clamps.
    • Can be used in homes that have two consumption meters (e.g. a separately metered heat pump). Make sure that the Smappee is installed within a distance of about 39.37 inches of both connection points. Note: Should not be used to combine solar readings with consumption readings.
    • Includes: 3 current clamps (cable lenght: 59.05 inches: 50 Amps), 3 Y-cables.
    - +
  2. Smappee repair service

    For setup in United States.

    Change your country

    Smappee repair service

    $159.00 excl. VAT

    Repair service if your Smappee Solar or Energy is defect after your warranty has expired.

    Important! Please contact our support team before purchase. Get a support ticket number with a confirmation to order the Smappee repair service. Send an email to support@smappee.com. Describe the problem and provide the serial number of your Smappee Energy or Solar. Send us your Smappee energy monitor by a parcel service of your choice. Our experts will investigate the problem and fix it. Repair is guaranteed. If we can't fix the hardware defect, you will receive a refurbished and tested replacement unit. Without any loss of data.

    - +
  3. Smappee exchange package to Smappee Solar

    For setup in United States.

    Change your country

    Smappee exchange package to Smappee Solar

    $199.00 excl. VAT

    Exchange Package to upgrade your Smappee Energy (non-solar) to a Smappee Solar (Incl. 1 Smappee Solar, 3 additional CTs and 3 V-cables)

    Important! Contact the Smappee Support team before purchasse. Send an e-mail to support@smappee.com. Follow the instructions from our Support team.Return your Smappee Energy for this exchange. Keep your current power cable and 3 CTs installed and do NOT send them back.

    - +
  4. Extension Y-cable

    For setup in United States.

    Change your country

    Extension Y-cable

    $6.30 excl. VAT
    • Y-cable to add the measurements of two CTs and connect them to one single Smappee input
    • Only works with Smappee Non-Solar or 1-Phase (3 inputs)
    • Doesn't work with Smappee Solar 3-Phase (6 inputs)
    • Doesn't work to combine measurements of solar production and consumption
    • Incl. 1 Y-cable
    • Note! Contact our Support team via support@smappee.com before purchase
    - +
  5. Replacement V-cable

    For setup in United States.

    Change your country

    Replacement V-cable

    $3.15 excl. VAT
    • V-cable is required to connect a CT to an input of the solar energy monitor
    • Only works with Smappee Solar
    • Note! Do not confuse the V-cable and the Y-cable. They are completely different.
    • Incl. 1 V-cable
    - +
  6. Optical sensor

    For setup in United States.

    Change your country

    Optical sensor

    $39.95 excl. VAT
    • Sensor to read out data on gas and water meters (typically gas) and to be used with the Smappee Gas & Water. 
    • This optical sensor is fit for meters with a mirror in the numbers 6, 8, 9 or 0 or for meters with a little rotating wheel. 
    • This item includes a sensor, a cable (39.37 inches)  to connect it to the Smappee monitor and 3 mounting strips for exact and easy installation on the meter.
    - +
  7. Magnetic sensor

    For setup in United States.

    Change your country

    Magnetic sensor

    $29.95 excl. VAT
    • Sensor to read out data on gas and water meters (typically water) and to be used with the Smappee Gas & Water.
    • This magnetic sensor is fit for meters that have a little hole on the left, on the right or underneath, where the sensor can be inserted. 
    • This item includes a sensor and a cable (39.37 inches) to connect the sensor to the Smappee monitor.
    - +
  Loading...
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x