Thanks to Smappee, you can access your customers’ real-time energy consumption and production data in several ways. What is more, the energy data can be available down to appliance level by submetering a specific appliance or group of appliances. Find out here how to get the most out of Smappee’s submetering options…

Submetering options

Option 1: Submeter from the distribution panel with Smappee’s CTs.

Submeter at the source with the Smappee Infinity: attach current clamps to the distribution panel. Depending on your electrical installation, you can measure up to 28 circuits of certain appliances or a group of appliances separately. Gather the most accurate energy data down to the appliance level and find out more about appliances with a variable profile, such as a heat pump or an EV charger.

Option 2: Submeter from the power outler with Smappee Switch.

Supplement the Smappee Infinity with the Smappee Switch. In addition to remotely controlling appliances, Smappee Swith, our genuinely intelligent smart plug, is also a single phase submeter. Just connect the Switch between the power outlet and the appliance or a power strip. It accurately measures the energy consumption of the connected appliance or group of appliances (up to 16 A.

Option 3: Submeter from the power cable with our patented NILM. 

By attaching a clamp to your power cable, Smappee can use NILM to detect appliances and their estimated consumption. This load disaggregation technology records the energy signal from a building and breaks it down into data that can be assigned to specific appliances. Submetering with NILM (Non-Intrusive Load Monitoring) identifies up to 5 appliances and maps out their approximate energy use with an average accuracy of 70%, at no additional cost. Most likely, the identified appliances will be among the following: refrigerator, freezer, microwave, stove, oven, vacuum cleaner, coffee maker (e.g. Nespresso, Senseo, etc.), dishwasher, iron, washing machine, tumble dryer, water pump, lights (>50W) or car charger. Note that the NILM feature only works in residential buildings and is disabled by default when installing Smappee. Find out here how this cost-efficient submeter option works and how users can improve Smappee’s NILM technology.

Thanks to the extensive range of submetering options, Smappee users can choose what options best fit their needs, depending on their electrical setup, the required level of accuracy and budget. Want to know more? Contact us here.